watch faces that handle EVENT_LIGHT_BUTTON_UP but not EVENT_LIGHT_BUTTON_DOWN
probably don't want the default EVENT_LIGHT_BUTTON_DOWN LED activation behavior
* minor enhancements for the countdown face
* Changed usage of countdown timer.
- Long button presses have been removed.
- The light button is used to restore the last countdown as well as enter setting mode when pressed again.
- The visual state has been removed from the display.
- The internal states have been renamed to reflect the new logic.
* restore time when countdown finished.
* support for fast forward on long press (untested).
* support for beeps similar to stop watch
* fixed bug wiht display when fast forwarding
* totp : rework and add SHA256/512
* totp : comment code
* totp : fix SHA224/SHA384 and examples
* totp : fix bug in totp_face_lfs
* totp : init_totp_record to SHA1
* totp : move TOTP-MCU to TOTP, update README and example
* totp : SHAX, use size_t n instead of harcoded 8
* clarify what to put in TOTP face
Co-authored-by: Emilien <Emilien>
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
* buzzer sequences: first draft, does not work on hardware yet (but in simulator)
* buzzer sequences: add changes to movement.c
* buzzer sequences: add demo face to Makefile
* buzzer sequences: fix problem of interrupted sounds. Add logic for repeating sub sequences. Tidy up (move logic to watch_buzzer files, remove buzzer_demo_face)
* buzzer sequences: tidy up even more
* buzzer sequences: disable registering a 32 Hz tick callback for watch faces, so it will be used exclusively by the buzzer sequences functionality
* buzzer sequences: add callback slot functionality to watch_rtc and make watch_buzzer use it. Switch internal buzzer sequences tick frequency to 64 Hz. Revert changes to movement.c
* interval face: add initial version
* interval face: fix theoretical problem in helper function
* buzzer sequences: fix parameter sanity check in watch_rtc code
* buzzer sequences/watch_rtc: optimize calling tick callbacks in RTC_Handler
* buzzer sequences/watch_rtc: fix error in calling callback functions
* buzzer sequences: revert changes to watch_rtc logic. Instead, use TC3 as the source for timing the sound sequences.
* buzzer sequences: fix frequency of callback
* buzzer sequences: integrate changes from PR #162 (set both CCBUF and PERFBUF for correct buzzer tone)
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
* set time face: add quick cycling through hours, minutes, etc. and handle February 29th properly
* set time face: add failsafe for "hanging" quick cycle mode
* set time face: get rid of compiler warning
* set time face: Fix typo and indentation errors
* Add tally face
* Fix copyright block to reflect real author
* Fix indentation
* More style editing, edited comments
* silence warning in tally_face
Co-authored-by: Andrew Mike <andrew@7thmagic.net>
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
* Intermediate changes
* Databank working
* Main commit for precision timing
First version where all functions are supposed to be working
* Fix math error in nanosec. File storage for location.
* Remove obsolete comments
* Missing page name on pages rotation - thanks to jeremy
* Delete file.diff
* Cleanup+tempchart
1) finetune must always reset last calibration time when doing non-0 time correction, even when you are not applying ppm correction.
2) Dithers over 31 periods not 10, more resolution with still no risk of overflow
3) Minute-boundery finetune fix. I also just got this 1-minute error after finetune...
4) Write frequency calibration value in 1 operation rather than 2. All RTC writes must be single operations to avoid partially correct data.
5) Some code cleanup
6) Tempchart face is added for temperature statistics
* Update set_time_hackwatch_face.c
* Math error in display code of finetune, allow to update correction time even without correction - by long alarm press
* Increase reliability of stopping & starting RTC timer
As it's quite dangerous operation
* hackwatch - days adjust down fix by long alarm
* unify style
* More comments & last style change
* Simulator support
RTC operations (watch_rtc_enable and watch_rtc_freqcorr_write) are in common libs.
* Unicode fix
* Crystal aging is now adjustable (AA page in nanosec - annual aging, ppm/year)
Aging is baked into fixed offset every time finetune is performed, as it relies on last adjustment time.
* Blink on non-0 page every minute in finetune to measure clock error
* Rolling back private changes
* Cleanup
* Cleanup
* Quality of life changes in nanosec
1. Does not calculate & apply ppm correction if less than 6 hours passed since previous adjustment (as it gives very high correction values which are unrealistic and unhelpful)
2. Idle timeout resets to face 0 only if no correction was made
* unify style
* Fix low-power errors in nanosec infrastructure, faster display in finetune
* Merge fix
* unify style
Co-authored-by: Jeremy O'Brien <neutral@fastmail.com>
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
* Create template for tachymeter
* Basic working tachymeter
* Improve UI for running and results
* Allow editing distance
* Alarm long-press to enter and exit editing mode
* Improve light button behaviour
* Set distance digit wise.
* Use 250ms resolution for total time
* Improve comments
* Bugfix: Show distance when running and face becomes active
* Update `%d` to `%lu` in `sprintf` call for `uint32_t`
* Ignore Alarm button (Up and Long-press) when showing results
* Improve GUI when running and face gets activated
* Change speed indicator from `/H` to `/h`
* silence warnings in tachymeter face
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
* buzzer sequences: first draft, does not work on hardware yet (but in simulator)
* buzzer sequences: add changes to movement.c
* buzzer sequences: add demo face to Makefile
* buzzer sequences: fix problem of interrupted sounds. Add logic for repeating sub sequences. Tidy up (move logic to watch_buzzer files, remove buzzer_demo_face)
* buzzer sequences: tidy up even more
* buzzer sequences: disable registering a 32 Hz tick callback for watch faces, so it will be used exclusively by the buzzer sequences functionality
* buzzer sequences: add callback slot functionality to watch_rtc and make watch_buzzer use it. Switch internal buzzer sequences tick frequency to 64 Hz. Revert changes to movement.c
* buzzer sequences: fix parameter sanity check in watch_rtc code
* stock stopwatch: first fully functional implementation
* stock stopwatch: fix typo in comment
* stock stopwatch: handle resuming from deep sleep mode properly
* buzzer sequences/watch_rtc: optimize calling tick callbacks in RTC_Handler
* buzzer sequences/watch_rtc: fix error in calling callback functions
* stock stopwatch: implement workaround for sleep mode
* stock stopwatch: merge current main into stock-stopwatch
* stock stopwatch: use TC counters as source for callbacks
* stock-stopwatch: revert unnecessary changes to watch_buzzer
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
